Siemens RM400 C Series Operating Manual page 102

7
Software
Configuring a graphical monitor
Example of how to configure the graphical monitor under SINIX V5.42:
Information on the parameters:
Graphics Hardware
Monitor Type
92
If you have not installed an additional graphics controller,
select an onboard graphics controller (Cirrus Alpine). If you
have installed an additional graphics controller, select an
onboard graphics controller of the type Millinenium.
[CHOICES]
Press the
See the type label on the graphical monitor.
[CHOICES]
Press the
RM400 C Models
function key and select a module.
function key
U24802-J-Z146-2-7600