Cleaning The System Unit; Cleaning The Floppy Disk Drive - Siemens RM400 C Series Operating Manual

Before you start cleaning work, switch all equipment off.
!
Make sure that no water gets inside the equipment.
Never use sprays, abrasive powder or cleaning agents which dissolve
synthetic materials.
12.1

Cleaning the system unit

To clean the components of the housing you simply need to wipe them down with a
dry cloth. If the surface is very dirty, you can use a cloth which you have moistened
with a non-caustic cleaning agent. After cleaning with a damp cloth, do not switch
the system unit back on until it is completely dry.
You can clean your mouse and keyboard with disinfectant wipes, but do not leave
fluid on the surfaces for more than five minutes.
Never leave these wipes lying on the housing after use. The cleaning
i
agent will attack the plastic if left there for an extended period.
You should also clean the surface of the monitor screen at regular intervals. Use a
moistened lint-free soft cloth followed by a dry soft cloth. You can also use special
screen wipes.

12.1.1 Cleaning the floppy disk drive

Clean the read/write head of the floppy disk drive with the appropriate cleaning disk
at the following intervals:
used every day:
used every week:
but always:
Follow the instructions given on the packaging of the cleaning disk.
U24802-J-Z146-2-7600
clean once a week
clean once a month
clean once a quarter
RM400 C Models
12
Equipment care
141