The Quarter-Inch Cartridge Tape Drive - Siemens RM400 C Series Operating Manual

Table of Contents

Advertisement

10.3

The quarter-inch cartridge tape drive

1
Figure 47: Controls on the quarter-inch cartridge tape drivel
(1)
Access LED
(2)
Drive door
(3)
Release button
The access LED is lit whenever the drive is active.
i
The quarter-inch cartridge tape drive is capable of reading and writing cartridges
with a capacity of 155 and 525 MB. It can also read 60-MB cartridges.
Opening the drive
You should open the drive door only when you need to insert or remove a cartridge.
At all other times the door should be left closed to keep dirt out.
You must not open the drive door while the access LED is lit.
!
Press the release button (3) in the top right-hand corner of the drive door and
Ê
swing the door down as far as it will go.
Closing the drive
Close the drive by pressing lightly on the drive door.
Ê
U24802-J-Z146-2-7600
2
RM400 C Models
10
Drives
3
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm400 c60Rm400 c62Rm400 c70Rm400 c72Rm400 c80Rm400 c90

Table of Contents