10
Drives
10.6
The 8 mm, 20/40 Gbyte cartrigde tape drive
The 8 mm, 20/40 Gbyte MTC drive has the following controls:
2
1
Figure 53: 8 mm, 20/40 Gbyte MTC drive controls
(1) =
amber LED (error indicator)
(2) =
green LED (standby indicator)
(3) =
green LED (tape motion indicator)
(4) =
Release button
Please note the following:
Only use EXATAPE-approved 8 mm magenetic tape cartridges. Other
!
cartridges can cause problems. Information on approved 8 mm cartrid-
ges is provided in this manual in the chapter "Accessories" on page 175.
The error indicator (1) (amber LED) lights up when the system is powered up
and is extinguished once the self-test has been passed successfully. It only
flashes if the MTC drive has a fault. It is illuminated if the MTC drive requires
cleaning.
124
3
4
RM400 C Models
U24802-J-Z146-2-7600