Siemens RM400 C Series Operating Manual page 139

Figure 56: Opening the CD-ROM drive tray
Inserting a CD-ROM
Ê Press the release button.
The drive tray comes out automatically and remains open.
Ê Place the CD-ROM on the drive tray with the label side up.
Ê Press the release button.
Then the drive tray closes automatically.
Removing a CD-ROM
Press the release button.
Ê
Ê Remove the CD-ROM from the tray.
Note that you cannot remove a CD-ROM while the drive is being
i
accessed.
Press the release button.
Ê
Then the drive tray closes automatically.
U24802-J-Z146-2-7600 RM400 C Models
10
Drives
129