Console And Tod Port Connector Pinouts For The Ptx10001-36Mr - Juniper PTX10001-36MR Hardware Manual

Table 33 on page 72 provides the pinout information of the RJ-45 management port connector. An
RJ-45 cable is supplied with the PTX10001-36MR.
Table 33: RJ-45 Management Port Connector Pinouts for the PTX10001-36MR
Pin Signal
1 TRP1+
2 TRP1–
3 TRP2+
4 TRP3+
5 TRP3–
6 TRP2–
7 TRP4+
8 TRP4–

Console and ToD Port Connector Pinouts for the PTX10001-36MR

The console port (labeled CON\ToD) is an RS-232 serial interface that uses an RJ-45 connector to
connect to a console management device. The default baud rate for the console port is 9600 baud.
Table 34 on page 73 provides the pinout information for the RJ-45 console connector. An RJ-45 cable
and an RJ-45 to DB-9 adapter are supplied with the PTX10001-36MR.
NOTE: If your laptop or PC does not have a DB-9 plug connector pin and you want to connect
your laptop or PC directly to a PTX10001-36MR, use a combination of the RJ-45 cable and
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
72