Table of Contents
Advertisement
2. Decide whether to place the front (port) end or the back (FRU) end of the PTX10001-36MR at the
front of the rack. Position the PTX10001-36MR in such a manner that the AIR OUT labels on
components are next to the hot aisle.
3. Align the hooks and the screw holes on the mounting bracket with the screw holes on the side of the
chassis. See
Figure 26 on page 84
Figure 26: Attach the Two Post Mounting Brackets to the PTX10001-36MR
4. Attach the mounting bracket to the device using the mounting screws. Tighten the screws.
5. Repeat Step
3
and Step
6. Have one person grasp both sides of the device, lift it, and position it in the rack so that the bracket is
aligned with the rack holes.
7. Have a second person secure the device to the rack by using the appropriate mounting screws (and
cage nuts and washers if your rack requires them). Tighten the screws. See
Figure 27: Attach the PTX10001-36MR to a Two-Post Rack
to see the proper alignment for the PTX10001-36MR.
4
on the opposite side of the device.
Figure 27 on page
84.
84
Advertisement
Table of Contents
