PTX10001-36MR System Software
The PTX10001-36MR runs Junos OS Evolved, which provides Layer 2 and Layer 3 switching, routing,
and security services. Junos OS Evolved runs natively on Linux, giving it direct access to all the Linux
utilities and operations. It is designed to be modular, allowing for upgrades to be done on a component-
by-component basis without a system reboot. Only those components changed are restarted. Junos OS
Evolved is easily portable and minimal work is required to make it work on any platform. It has the same
CLI user interface, the same code base for applications and features, and the same management and
automation tools as Junos OS. However, the Junos OS Evolved infrastructure is entirely modernized,
giving you the high availability, portability, faster innovation, and simplified upgrades you need.
For information about which features are supported on PTX Series devices, see
Port Panel and Management Panel
The front panel of the PTX10001-36MR contains 36 network ports, port LEDs, console and
management ports, and system status LEDs.
panel.
Figure 1: PTX10001-36MR Port Panel
1
ESD grounding point
—
2
12 network ports—QSFP28 cages
—
3
Clock connectors (10 MHz and 1 PPS)
—
4
RJ-45 management port (10 Mbps/100
—
Mbps/1000 Mbps)
Figure 1 on page 4
shows the PTX10001-36MR front
6
RJ-45 console and time of day (TOD) port
—
7
Offline button. Pressing and holding this
—
button for more than 4 seconds turns the
device off. Pressing the button again turns
the device back on.
8
Reset button (do not use unless directed by
—
JTAC)
9
24 network ports—QSFP56-DD cages
—
Feature
Explorer.
4