Juniper PTX10001-36MR Hardware Manual page 26

• Chassis status LEDs
• Management Port LEDs
Figure 7 on page 17 shows the locations of the SSD and status LEDs.
Figure 7: PTX10001-36MR SSD Port LEDs and Status LEDs
1 SSD port LEDs
—
The following sections explain how to interpret these LEDs.
PTX10001-36MR SSD Port LEDs
The PTX10001-36MR has two 200-GB Serial Advanced Technology Attachment (SATA) solid-state
drives (SSD). Each SSD has its own status LED. The LEDs are located on the management panel next to
the chassis status LEDs. The LEDs are labeled SSD0 and SSD1.
Table 6 on page 17 describes the SSD status LEDs.
Table 6: PTX10001-36MR SSD LEDs
LED
SSD0 and SSD1
Color State
Unlit Off
Green Blinking
2 Status LEDs
—
Description
The SSD is not being accessed.
The SSD is active and being accessed.
17