Table of Contents
Advertisement
• Screwdriver appropriate for the M6 x 10 mm screws.
To connect a grounding cable to the PTX10001-36MR:
1. Attach a grounding cable to earth ground (such as the rack in which the PTX10001-36MR is
mounted) and then attach it to the chassis grounding point.
location of the chassis grounding point.
Figure 29: PTX10001-36MR Grounding Points
2. Secure the grounding lug to the protective earthing terminal with the washers and screws. See
30 on page
87.
Figure 30: Connect a Grounding Cable to a PTX10001-36MR Device
3. Dress the grounding cable and ensure that it does not touch or block access to other device
components and that it does not drape where people could trip over it.
Figure 29 on page 87
shows the
87
Figure
Advertisement
Table of Contents
