Table of Contents
Advertisement
4. Grasp the handle on the fan module and pull firmly to slide the fan module halfway out of the
chassis.
WARNING: To avoid injury, do not touch the fan with your hands or any tools as you
slide the fan module out of the chassis—the fan might still be running.
5. When the fan stops spinning, slide the fan module completely out of the chassis.
6. Place the fan module in the antistatic bag or on the antistatic mat placed on a flat, stable surface. See
Figure 40 on page
106.
Figure 40: Remove a Fan Module from a PTX10001-36MR
NOTE: When a fan module is removed, the CLI message Fan/Blower is Absent is logged in the
system log, and the system raises a minor alarm.
Install a Fan Module in the PTX10001-36MR
Before you install a fan module in a PTX10001-36MR, ensure that you have taken the necessary
precautions to prevent electrostatic discharge (ESD) damage (see
Damage" on page
173).
Ensure that you have the following parts and tools available:
• ESD grounding strap
• Phillips (+) screwdriver, number 1
"Prevention of Electrostatic Discharge
106
Advertisement
Table of Contents
