Table of Contents
Advertisement
PTX10001-36MR Installation Overview
IN THIS SECTION
Overview of Installing the PTX10001-36MR | 76
PTX10001-36MR Installation Safety Guidelines | 77
Overview of Installing the PTX10001-36MR
Before you begin to install and connect a PTX10001-36MR, ensure that you have reviewed the
information in
"PTX10001-36MR Installation Safety Guidelines" on page
You can mount a PTX10001-36MR:
• Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets provided with the
PTX10001-36MR for this configuration.
• Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket provided in
the standard mounting kit for this configuration. Recessed mounting is primarily used in enclosed
cabinets to allow room for cabling.
To install and connect a PTX10001-36MR:
1. Unpack the PTX10001-36MR and verify the components received. See
PTX10001-36MR" on page
2. Determine how the device is to be mounted.
Mount the PTX10001-36MR in a rack or cabinet. See
Cabinet" on page
80.
3. For installations that require a separate grounding conductor to the chassis, follow the instructions in
"Connect the PTX10001-36MR to Ground" on page
4. Connect the PTX10001-36MR to power. Depending on your configuration, follow the instructions in
"Connect AC/HVDC Power to the PTX10001-36MR" on page 88
PTX10001-36MR" on page
5. Connect the PTX10001-36MR to a management console for initial configuration. See
PTX10001-36MR to a Management Console" on page
78.
"Mount the PTX10001-36MR in a Rack or
86.
90.
77.
"Unpack the
or
"Connect DC Power to the
96.
76
"Connect the
Advertisement
Table of Contents
