Table of Contents
Advertisement
NOTE: Each power supply must be connected to a dedicated power source outlet.
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.
RELATED DOCUMENTATION
PTX10001-36MR Power System | 25
Connect the PTX10001-36MR to Power | 85
Maintain the PTX10001-36MR Transceivers and
Fiber-Optic Cables
IN THIS SECTION
Remove a QSFP28 or QSFP56-DD Transceiver | 115
Install a QSFP28 or QSFP56-DD Transceiver | 116
Remove a Transceiver | 117
Install a Transceiver | 119
Disconnect a Fiber-Optic Cable from the PTX10001-36MR | 122
Connect a Fiber-Optic Cable to the PTX10001-36MR | 123
Maintain Fiber-Optic Cables in the PTX10001-36MR | 124
The transceivers for the PTX10001-36MR router are hot-removable and hot-insertable field-replaceable
units (FRUs). You can remove and replace them without powering off the device or disrupting device
functions.
https:/ /www.juniper.net/customers/support/tools/updateinstallbase/
114
.
Advertisement
Table of Contents
