Table of Contents
Advertisement
Table 10: PTX10001-36MR Fan Module LED
LED Color
LED State
Red
On steadily
RELATED DOCUMENTATION
PTX10001-36MR System Overview | 2
PTX10001-36MR Power System | 25
PTX10001-36MR Power System
IN THIS SECTION
PTX10001-36MR AC/HVDC Power Supply Description | 26
PTX10001-36MR DC Power Supply Description | 38
The PTX10001-36MR is powered by 3000-W redundant AC/HDVC or DC power supplies that are
preinstalled at the factory. The PTX10001-36MR is powered by two power supplies for 1 + 1
redundancy. The power supplies are hot-removable and hot-insertable. If one power supply fails, you
can replace it without powering off or disrupting the routing function. The other power supply balances
the electrical load without interruption. Each power supply has two outputs: 12 V and 12 V standby.
Two counter-rotating fans in each power supply provide front to back cooling. The input voltages are as
follows:
• AC input voltage range: 200-277 VAC
• HDVC input voltage range: 204-380 VDC
• DC input voltage range: -40 VDC Minimum, -72 VDC maximum
(Continued)
Description
An error has been detected in the fan module. Replace the fan module as soon as
possible. Either the fan has failed or it is seated incorrectly. To maintain proper airflow
through the chassis, leave the fan module installed in the chassis until you are ready to
replace it.
25
Advertisement
Table of Contents
