Table of Contents
Advertisement
• An external management device such as a PC
• An RJ-45 to DB-9 rollover cable to connect the external management device to the console port
Power Off the AC-Powered PTX10001-36MR
1. Connect to the router by using one of the following methods:
• Connect a management device to the console (COM/ToD) port on a PTX10001-36MR by
following the instructions in
96.
• Connect a management device to the management (MGMT) port by following the instructions in
"Connect the PTX10001-36MR to a Management Ethernet Device" on page
2. Shut down Junos OS Evolved from the external management device by issuing the request system halt
operational mode CLI command. This command shuts down Junos OS Evolved gracefully and
preserves system state information. A message appears on the console, confirming that the operating
system has halted.
user@host> request system halt
Halt the system ? [yes,no] (no) yes
You see the following output (or something similar) after entering the command:
System going down IMMEDIATELY
*** System shutdown message from user@host***
halt the system at Thu Jun 20 04:57:23 2019
user@host> Connection to host closed by remote host.
Connection to host closed.
CAUTION: The final output of any version of the request system halt command is the
"The operating system has halted." Although traffic and the operating system have
stopped, the PTX10001-36MR power supply LEDs remain lit and a fan module
"Connect the PTX10001-36MR to a Management Console" on page
95.
101
Advertisement
Table of Contents
