Table of Contents
Advertisement
Troubleshoot the PTX10001-36MR
IN THIS SECTION
PTX10001-36MR Troubleshooting Resources Overview | 128
PTX10001-36MR Alarm Messages Overview | 129
System Alarm Messages on the PTX10001-36MR | 129
PTX10001-36MR Troubleshooting Resources Overview
To troubleshoot a PTX10001-36MR, you use the Junos OS Evolved CLI, alarms, and LEDs on the
network ports, management panel, and components.
• LEDs—When the Routing Engine detects an alarm condition, it lights the red or yellow alarm LED on
the management panel as appropriate. You can also use component LEDs and network port LEDs to
troubleshoot the PTX10001-36MR. For more information, see the following topics:
•
"PTX10001-36MR Chassis Status LEDs" on page 18
•
"PTX10001-36MR Management Panel LEDs" on page 16
•
"PTX10001-36MR Network Port LEDs" on page 13
•
"PTX10001-36MR Fan Module LEDs" on page 24
•
"PTX10001-36MR AC Power Supply LED" on page 28
•
"PTX10001-36MR DC Power Supply LED" on page 39
• CLI—The CLI is the primary tool for controlling and troubleshooting hardware, Junos OS Evolved,
routing protocols, and network connectivity. CLI commands display information from routing tables,
information specific to routing protocols, and information about network connectivity derived from
the ping and traceroute utilities. For information about using the CLI to troubleshoot Junos OS
Evolved, see the appropriate Junos OS Evolved user guide.
128
Advertisement
Table of Contents
