Table of Contents
Advertisement
NOTE: When you remove multiple devices from a rack, remove the device at the top of the rack
first and proceed to remove the rest of the devices from top to bottom.
• Ensure that the rack is stable and secured to the building.
• Ensure that there is enough space to place the removed PTX10001-36MR in its new location and
along the path to the new location.
• Read
"General Safety Guidelines and Warnings" on page 148
Safety Guidelines" on page
• Power off the device (see
• Disconnect the power cords.
• Ensure that you have disconnected any cables or wires attached to the PTX10001-36MR (see
"Disconnect a Fiber-Optic Cable from the PTX10001-36MR" on page
To remove a PTX10001-36MR from a rack:
1. Have one person support the weight of the device while another person uses the screwdriver to
remove the front mounting screws that attach the chassis mounting brackets to the rack.
2. Remove the PTX10001-36MR from the rack.
3. Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the
rear of the rack.
4. Place the removed screws and rear mounting blades in a labeled bag. You will need them when you
reinstall the chassis.
5. Transport the PTX10001-36MR to the new location.
RELATED DOCUMENTATION
Unpack and Mount the PTX10001-36MR | 78
77.
"Power Off the PTX10001-36MR" on page
and
"PTX10001-36MR Installation
100).
122).
126
Advertisement
Table of Contents
