Table of Contents
Advertisement
grounding the chassis.) The cable lugs are dual hole and sized to fit 1/4-20 UNC terminal studs at 15.86-
mm (0.625-in.) center line.
Figure 18: DC Power Cable Lugs
CAUTION: Before you begin to install the PTX10001-36MR, a licensed electrician must
attach a cable lug to the power cables that you supply. A cable with an incorrectly
attached lug can damage the PTX10001-36MR.
View Power Statistics
You can get additional information about the status of the power modules using the show chassis power
command and show chassis power detail command. Here are some examples of the CLI output:
44
Advertisement
Table of Contents
