Ptx10001-36Mr Site Guidelines And Requirements - Juniper PTX10001-36MR Hardware Manual

Table 21: Site Preparation Checklist
Item or Task
Cables
Acquire cables and connectors:
•
Determine the number of cables needed
based on your planned configuration.
•
Review the maximum distance allowed
for each cable. Choose the length of
cable based on the distance between the
hardware components being connected.
Plan the cable routing and management.
RELATED DOCUMENTATION
PTX10001-36MR Installation Safety Guidelines | 77
Installation Instructions Warning | 153
Chassis and Component Lifting Guidelines | 154
Restricted Access Warning | 154
Ramp Warning | 156
Rack-Mounting and Cabinet-Mounting Warnings | 156
Grounded Equipment Warning | 160

PTX10001-36MR Site Guidelines and Requirements

IN THIS SECTION
PTX10001-36MR Environmental Requirements and Specifications | 49
(Continued)
For More Information
•
"Determine Transceiver Support for
the PTX10001-36MR" on page 58
•
"Cable and Connector Specifications
for MX and PTX Series Devices" on
page 59
Performed by Date
48