10. Enable the Telnet service.
[edit]
root@# set system services telnet
NOTE: When Telnet is enabled, you cannot log in to a PTX10001-36MR through Telnet by
using root credentials. Root login is allowed only for SSH access.
11. Commit the configuration to activate it on the device.
[edit]
root@# commit
RELATED DOCUMENTATION
PTX10001-36MR Management Cable Specifications and Pinouts | 70
Power Off the PTX10001-36MR
IN THIS SECTION
Power Off the AC-Powered PTX10001-36MR | 101
Power Off the DC-Powered PTX10001-36MR | 102
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
damage. See
"Prevention of Electrostatic Discharge Damage" on page
• Ensure you do not need to route traffic through the PTX10001-36MR.
• Ensure you have the following parts and tools available to power off the PTX10001-36MR:
• An ESD grounding strap
173.
100