Combined Gsm And Umts Configuration - Cisco 3825 Software Configuration Manual

Appendix B Configuration Examples

Combined GSM and UMTS Configuration

The combined GSM and UMTS configuration allows both the GSM and UMTS technologies to become
aggregated over the traditional multilink backhaul connection (see
Figure B-10
BTS
Node-B
MWR_A
!
card type E1 0 0
card type E1 0 1
card type E1 0 2
!
!
redundancy
mode y-cable
standalone
!
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-participate aim 1
network-clock-select 1 E1 0/0/1
network-clock-select 1 E1 0/1/1
!
ipran-mib snmp-access inBand
ipran-mib location cellSite
!
!
controller E1 0/0/0
framing NO-CRC4
clock source internal
channel-group 0 timeslots 1-31
!
controller E1 0/0/1
channel-group 0 timeslots 1-31
!
controller E1 0/1/0
framing NO-CRC4
clock source internal
channel-group 0 timeslots 1-31
OL-15667-03
Combined GSM and UMTS Configuration
GSM + UMTS Configuration
S0/0/0:0
Multilink1
S0/1/0:0
10.10.10.1/30
ATM 0/2/0
MWR_A
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
Figure B-10).
S0/0/0:0
Multilink1
S0/1/0:0
10.10.10.2/30
ATM 0/2/0
MWR_B
Overview
BSC
RNC
B-63