Show Umts-Iub Traffic - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

show umts-iub traffic

To display traffic rates, in bits per second, at 1 second, 5 seconds, 1 minute, 5 minutes, and 1 hour
intervals for UMTS data transmitted and received over the backhaul, use the show umts-iub traffic
command in privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History Release
12.4(12)MR
Examples The following is an example of the output generated by this command.
Router# show umts-iub traffic
UMTS-Iub(ATM1/0/0.1): traffic (1sec/5sec/1min/5min/1hr) units(bps)
decompression traffic( 81120/ 81120/ 80989/ 81006/ 6287)
UMTS-Iub(ATM1/0/0.2): traffic (1sec/5sec/1min/5min/1hr) units(bps)
decompression traffic(
Related Commands Command
clear umts-iub
OL-15667-03
show umts-iub traffic
Modification
This command was introduced.
compression traffic(
compression traffic(
2400/ 2496/ 2495/ 2496/
0/ 0/ 4/ 4/ 1)
0/ 0/ 19/ 19/ 2)
Description
Clears the statistics displayed.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
show umts-iub traffic
203)
A-111