Cisco 3825 Software Configuration Manual page 152

encapsulation l2tpv3
The following example configures ATM AAL5 over L2TPv3 PW:
Router# config t
Router(config)# interface atm 0/0/1
Router(config-if)# pvc 0/10 l2transport
Router(config-if-atm-l2trans-pvc)# encapsulation aal5
Router(config-if-atm-l2trans-pvc)# xconnect 1.1.1.1 10 pw-class l2tp
Router(config-if-atm-l2trans-pvc-xconn)# exit
Router(config-if-atm-l2trans-pvc)# exit
Router(config-if)# exit
Router(config)# exit
Related Commands Command
encapsulation mpls
pseudowire-class
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-20
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
Description
Configures MPLS as the data encapsulation method over
AToM-enabled IP/MPLS networks.
Specifies the name of an L2TP pseudowire-class and enters
pseudowire-class configuration mode.
OL-15667-03