Show Umts-Iub Pvc - Cisco 3825 Software Configuration Manual

show umts-iub pvc

show umts-iub pvc
To display the pvc mapping of the UMTS Iub interface, use the show umts-iub pvc command in
privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.4(2)MR
Examples The following is an example of the output generated by this command.
Router# show umts pvc
UMTS(ATM0/0/1): VCD info
VCD Mapping:
Local Index(1) <--> Local VCD(1) <--> Remote Index(1)
Local VCDs (not sent):
Local VCDs (sent):
Index(1), VPI/VCI(2/100), Encap(6), SC(0), Peak(1920), Avg/Min(0), Burst Cells(0)
Remote VCDs:
Index(1), VPI/VCI(2/100), Encap(6), SC(0), Peak(1920), Avg/Min(0), Burst Cells(0)
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-110
show umts-iub pvc
Modification
This command was introduced.
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
OL-15667-03