Cisco 3825 Software Configuration Manual page 225

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show l2tp tunnel
To display basic information about all L2TP tunnels, use the show l2tp tunnel command in the user
EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
User EXEC
Command History Release
11.2
12.1(1)T
12.1(2)T
12.4(12)MR2
Usage Guidelines
Use the show l2tp tunnel command to display information about all active tunnels using L2TP.
Examples The following is sample output from the show l2tp tunnel command on a device with active L2F and
L2TP tunnels:
Router# show l2tp tunnel
L2TP Tunnel Information Total tunnels 1 sessions 4
LocID RemID Remote Name
2220
Router#
Router#
Router#
Router#
Related Commands Command
show l2tp domain
show l2tp group
show l2tp history failure
OL-15667-03
show l2tp tunnel
Modification
This command was integrated into Cisco IOS Release 12.4(12)MR2.
This command was enhanced to display Point-to-Point Protocol over
Ethernet (PPPoE) information.
This command was enhanced to display PPPoE session information on
actual Ethernet interfaces.
This command was integrated into Cisco IOS Release 12.4(12)MR2.
State
55756 mwr2 est
Remote Address Port
99.99.99.99 0
Description
Displays all VPDN domains and DNIS groups configured on the
network access server (NAS).
Displays a summary of the relationships among VPDN groups and
customer/VPDN profiles, or summarizes the configuration of a VPDN
group including DNIS/domain, load sharing information and current
session information.
Displays the content of the failure history table.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
show l2tp tunnel
Sessions L2TP Class/
VPDN Group
4 l2tp_default_cl
A-93