Cisco 3825 Software Configuration Manual page 236

show umts-iub errors
show umts-iub errors
To display the error statistics of the UMTS Iub interface, use the show umts-iub errors command in
privileged EXEC mode.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.4(2)MR
Examples The following are examples of the output generated by this command.
Example 1:
Receiving traffic from shorthaul when the peering connection is not connected with the remote router
yet.
Router# show umts errors atm 0/0/1
UMTS-Iub(ATM0/0/1): backhaul_peer_not_ready ========= 5
5 is the number of packets received from shorthaul.
Example 2
The peering connection is up and shorthaul is receiving traffic from a pvc that's NOT configured on the
remote peering router's shorthaul.
Router# show umts errors atm 0/0/1
UMTS-Iub(ATM0/0/1):
5 is also the number of packets.
Example 3
Error statistics that the code keeps track of if the number is not zero.
Router# show umts errors
UMTS-Iub(ATM1/1/1): backhaul_peer_not_ready ===== 6
UMTS-Iub(ATM1/1/1): no_remote_pvc =============== 6
UMTS-Iub(ATM1/1/1): backhaul_invalid_pak ======== 1
UMTS-Iub(ATM1/1/1): decompression_failures ====== 1
UMTS-Iub(ATM1/1/1):
UMTS-Iub(ATM1/1/1): compression_failures ======== 1
UMTS-Iub(ATM1/1/1):
UMTS-Iub(ATM1/1/1):
UMTS-Iub(ATM1/1/1):
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-104
show umts-iub errors
Modification
This command was introduced.
no_remote_pvc =============== 5
no_shorthaul_pak_available == 1
no_backhaul_pak_available === 1
no_backhaul_interface ======= 1
backhaul_interface_down ===== 1
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
OL-15667-03