Show Xconnect All - Cisco 3825 Software Configuration Manual

show xconnect all

show xconnect all
To display information about xconnect attachment circuits and pseudowires (PWs), use the show
xconnect all command in the privileged EXEC mode.
Syntax Description all
interface
interface
peer ip-address
{all | vcid vcid}
detail
Command Modes
Privileged EXEC
Command History Release
12.0(31)S
12.2(28)SB
12.4(11)T
12.2(33)SRB
12.4(16)MR
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-112
show xconnect {all | interface interface | peer ip-address {all | vcid vcid}} [detail]
Displays information about all xconnect attachment circuits and PWs.
Displays information about xconnect attachment circuits and PWs on the specified
interface. Valid values for the interface argument are as follows:
atm number—Displays xconnect information for a specific ATM interface or
•
subinterface.
atm number vp vpi-value—Displays virtual path (VP) xconnect information
•
for a specific ATM virtual path identifier (VPI). This command does not
display information about virtual connection (VC) xconnects using the
specified VPI.
atm number vp vpi-value/vci-value—Displays VC xconnect information for a
•
specific ATM VPI and virtual circuit identifier (VCI) combination.
• ethernet number—Displays port-mode xconnect information for a specific
Ethernet interface or subinterface.
• fastethernet number—Displays port-mode xconnect information for a specific
Fast Ethernet interface or subinterface.
• serial number—Displays xconnect information for a specific serial interface.
• serial number dlci-number—Displays xconnect information for a specific
Frame Relay data-link connection identifier (DLCI).
Displays information about xconnect attachment circuits and PWs associated with
the specified peer IP address.
• all—Displays all xconnect information associated with the specified peer IP
address.
vcid vcid—Displays xconnect information associated with the specified peer IP
•
address and the specified VC ID.
(Optional) Displays detailed information about the specified xconnect attachment
circuits and PWs.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.2(28)SB.
This command was integrated into Cisco IOS Release 12.4(11)T.
This command was integrated into Cisco IOS Release 12.2(33)SRB.
This command was integrated into Cisco IOS Release 12.4(16)MR.
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
OL-15667-03