Umts-Iub Congestion Priority - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

umts-iub congestion priority

To configure the congestion control priority for UMTS, use the umts-iub congestion priority PVC
configuration command.
Syntax Description protected
2-9
Defaults
The default setting is 9.
Command Modes PVC configuration
Command History Release
12.4(4)MR1
Examples
The following example shows how to configure the UMTS congestion priority:
Router(config-if) pvc 2/1 qsaal
Router(config-if-atm-vc) umts-iub congestion priority protected
Related Commands Command
umts-iub congestion-control
OL-15667-03
umts-iub congestion priority [protected] [2-9]
The highest priority traffic which will never be throttled during congestion.
The congestion priority with 2 being the highest and 9 being the lowest
priority. Lower priority traffic are throttled before higher priority traffic.
Modification
This command was introduced.
Description
Enables the congestion control under the UMTS shorthaul interface.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
umts-iub congestion priority
A-125