Cisco 3825 Software Configuration Manual page 239

Mobile wireless edge router
Table of Contents

Advertisement

Appendix A
Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show umts-iub peering
To display the peering status, statistics, and history of the UMTS Iub interface, use the show umts-iub
peering command in privileged EXEC mode.
Syntax Description
details
Command Modes
Privileged EXEC
Command History
Release
12.4(2)MR
12.4(4)MR
Examples
The following are examples of the output generated by this command.
Example 1
Router# show umts peering atm 0/0/1
UMTS-Iub(ATM0/0/1): Peering Information
UMTS-Iub(ATM0/0/1):
UMTS-Iub(ATM0/0/1):
UMTS-Iub(ATM0/0/1):
UMTS-Iub(ATM0/0/1):
UMTS-Iub(ATM0/0/1):Version: 1
UMTS-Iub(ATM0/0/1):
UMTS-Iub(ATM0/0/1):
UMTS-Iub(ATM0/0/1):
Example 2
Router# show umts peering detail atm 0/0/1
UMTS-Iub(ATM0/0/1): Peering Information (Version 1)
05/15/02 02:35:50 AM: BACKHAUL UP
05/15/02 02:35:50 AM: OPEN
05/15/02 02:35:50 AM: CLOSE
05/15/02 02:35:50 AM: OPEN
05/15/02 02:35:59 AM: TIMEOUT-
05/15/02 02:36:28 AM: OPEN
05/15/02 02:36:28 AM: RCR+
05/15/02 02:36:28 AM: RCA
03/01/02 12:00:37 AM: Local RX(NOT AVAILABLE) TX(NOT AVAILABLE),
AVAILABLE) TX(NOT AVAILABLE)
05/15/02 02:35:52 AM: Local RX(NO ALARM
AVAILABLE) TX(NOT AVAILABLE)
05/15/02 02:36:28 AM: Local RX(NO ALARM
) TX(NO ALARM
OL-15667-03
show umts-iub peering [details]
Provides detail information about peering.
Modification
This command was introduced.
This command added IMA in the output, how traffic for a PVC is off loaded
to an alternate backhaul, and how alarms are carried over primary backhaul.
Local (40.40.40.40:6666) States:
Remote (40.40.40.41:6666) States:
)
Connect State: OPEN
Redundancy State: ACTIVE
Alarm State: RX(NO ALARM)
Alarm State: RX(NO ALARM)
Version: 1
INIT
--> CLOSED
CLOSED
--> CON_SENT
CON_SENT --> CLOSING
CLOSING
--> STOPPING
STOPPING --> STOPPED
STOPPED
--> CON_SENT
CON_SENT --> ACK_SENT
ACK_SENT --> OPEN
) TX(NO ALARM
) TX(NO ALARM
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
show umts-iub peering
TX(NO ALARM)
TX(NO ALARM)
Remote RX(NOT
),
Remote RX(NOT
),
Remote RX(NO ALARM
A-107

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents