Interface Atm Ima - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

interface atm ima

To configure an ATM IMA group and enter interface configurations mode, use the interface atm ima
global configuration command. If the group does not exist when the command is issued, the command
automatically creates the group.
Syntax Description slot
group-number
Defaults
By default there are no IMA groups, only individual ATM links.
Command Modes
Global configuration
Command History Release
12.0(5)XE
12.4(4)MR
Usage Guidelines
When a port is configured for IMA functionality, it no longer operates as an individual ATM link.
Specifying ATM links as members of a group using the ima-group interface command does not enable
the group. You must use the interface atm slot/ima<group-number> command to create the group.
Examples
The following example shows the how to create the IMA group:
Router(config)# interface ATM0/IMA0
Router(config-if)# no ip address
Related Commands Command
ima-group
ima group-id
interface atm
show ima interface atm
OL-15667-03
interface atm slot/ima<group-number>
Specifies the slot location of the ATM IMA port adapter.
Specifies an IMA group number from 0 to 3. You can create up to four
groups.
Modification
This command was introduced.
This command was incorporated.
Description
Configures the physical links as IMA group members; execute this
interface configuration command for each physical link that you
include in an IMA group.
Enables the user to configure the IMA Group ID for the IMA
interface.
Configures physical links for ATM.
Displays general and detailed information about IMA groups and the
links they include.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
interface atm ima
A-37