Ipran-Mib Location - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

ipran-mib location

Use the ipran-mib location command in the global configuration mode to define the location of the
device. It is also used to assist the network management system in properly displaying the topology of
the system.
Syntax Description ipran-mib location ?
Defaults
cellSite.
Command Modes Interface configuration
Command History Release
12.4(2)MR1
12.4(9)MR
Examples
Router# config t
Router(config)# ipran-mib location aggSite
Router(config)# ipran-mib location cellSite
Router(config)# ipran-mib location undefined
Router(config)# no ipran-mib location
Router(config)# exit
Related Commands
Command
ipran-mib snmp-access
OL-15667-03
ipran-mib location location
Modification
This command was introduced.
Support for utilization notification was removed. This command is supported to
maintain compatibility.
addSite located at BSC or RNC site.
•
cellSite Located at BTS or Node B site.
•
undefined Undefined location.
•
Description
Defines the type of connectivity between the device and the network
management system.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
ipran-mib location
A-51