Ipran-Mib Threshold-Warning - Cisco 3825 Software Configuration Manual

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference

ipran-mib threshold-warning

Use the ipran-mib threshold-warning command in the global configuration mode to specify a level of
traffic where the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects
are marked as "warning."
All changes to this threshold take affect at the end of the current interval. The value for this object must
be greater than the value specified for the ipran-mib threshold-acceptable command keyword.
Also, the value for this object must be less than or equal to value of the
cirbhBackHaulOverloadedThreshold object. This parameter corresponds to the
cirbhBackHaulWarningThreshold object.
Syntax Description
ipran-mib
threshold-warning
Defaults 70 percent.
Command Modes Interface configuration
Command History Release
12.4(2)MR1
12.4(9)MR
Examples
Router# config t
Router(config)# ipran-mib threshold-warning 60
Router(config)# ipran-mib threshold-warning 80
Router(config)# no ipran-mib threshold-warning
Router(config)# exit
Related Commands
Command
ipran-mib
threshold-acceptable
ipran-mib
threshold-overloaded
ipran-mib
backhaul-notify-interval
OL-15667-03
ipran-mib threshold-warning [30-100 Utilization default (percent)]
Modification
This command was introduced.
Support for utilization notification was removed. This command is supported to
maintain compatibility.
ipran-mib threshold-warning percent
Description
Specifies the acceptable level of traffic.
Specifies the amount of traffic that indicates the backhaul is
overloaded.
Specifies the interval used to suppress the generation of utilization
notifications.
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
ipran-mib threshold-warning
A-55