Cisco 3825 Software Configuration Manual page 123

Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
disable-eadi
!
!
control-plane
!
line con 0
line aux 0
line vty 04
!
ntp server W.X.Y.Z
!that all the MWTM reports sync with the correct time. MWTM should sync to the same NTP
!server.
BSC/RNC Configuration
!
version 12.4
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname hostname
!
boot-start-marker
boot system flash slot0:
boot-end-marker
!
card type e1 0 0
card type e1 0 1
card type e1 0 2
logging buffered 1000000 debugging
enable password
!
no aaa new-model
!
resource manager
!
clock timezone EST -5
!
redundancy
!
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-participate aim 1
network-clock-select 1 E1 0/0/0
network-clock-select 2 E1 0/0/1
network-clock-select 3 E1 0/1/1
network-clock-select 4 E1 0/2/0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
no ip dhcp use vrf connected
!
!
OL-15667-03
logging synchronous
login
password !--- Set VTY password
!--- Set W.X.Y.Z to the NTP server on the network. This is important so
!--- Enter <hostname> here
!--- Image Name
!--- Set the ENABLE password here
!--- Example of setting time zone
mode y-cable
standalone
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
Saving Configuration Changes
4-65