Cisco 3825 Software Configuration Manual page 164

gsm-abis remote
gsm-abis remote
To configure the remote parameters required to establish an Internet Protocol/User Datagram Protocol
(IP/UDP) backhaul connection, use the gsm-abis remote Interface configuration command.
Syntax Description ip-address
port
Defaults There are no default settings or behaviors.
Command Modes Interface configuration
Command History Release
12.4(2)MR
Examples The following example shows how to configure the remote parameters:
Router(config)# interface Serial10/1/0.0
Router(config-if)# encapsulation gsm-abis
Router(config-if)# gsm-abis remote 10.10.10.1 5504
Related Commands Command
gsm-abis local
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
A-32
gsm-abis remote [ip-address] [port]
(Optional) The IP address for the entry you wish to establish.
(Optional) The port you want to use for the entry you wish to establish.
Modification
This command was introduced.
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
Description
Configures the local parameters for an IP/UDP backhaul
connection.
OL-15667-03