Master Reset (P999) - Siemens MAG 1100 Operating Instructions Manual

P927 Distance Measurement
The distance between the surface and the transducer face (displays only as % of Empty).
Primary Index
Values
Related
Use P923 unless the distance information is required in percent.

Master Reset (P999)

This feature resets all parameters to original values.
Primary Index
Values
Use this feature prior to initial programming if arbitrary Parameter Values were used
during a bench test, or after upgrading the software. Following a Master Reset, complete
reprogramming is required.
To perform a Master Reset, access P999 and press CLEAR
the reset is complete.
In dual point units, both points can be reset at the same time by setting the index to 00
and pressing the CLEAR
CAUTION: be careful when using this feature. All data for all points will be reset. For
convenience, be sure to record the values you want to re-enter.
7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL
Transducer
Range: 0.000 to 9999% (Displays as % of Empty)
• P005 Units
• P006 Empty
Single Point Model
Global
Range: 0.000 to 9999
keys.
Dual Point Model
Transducer
. C.ALL displays until
Page 221