Appendix H: Software Revision History; Multiranger 100 - Siemens MAG 1100 Operating Instructions Manual

Appendix H: Software Revision History

MultiRanger 100

Soft-
ware Date
Rev.
1.00 08/15/2005
1.01 09/21/2005
1.02 12/12/2001
1.03 08/27/2002
7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL
Changes
• Pilot Release.
• Internal Release.
• Initial Release.
• Clarified return message for factory RS232
test.
• Prevent entering of strings with invalid fields
in Dolphin Plus.
• Properly convert ft/sec to m/sec in P654.
• Eliminated rogue watchdog resets from
repeatedly pressing hand programmer enter
while in P901-P90.
• Allow 32 bit read/write as seconds.
• Factory mode lock is written to flash.
• Cleaned up compiler errors and Lint
warnings.
• Modified handling of non-quick start
parameters.
• Modifications for Production Testing.
• Users may now configure the SmartLinx
memory map.
Page 251