The MultiRanger 100 and 200
The MultiRanger is available in two models, MultiRanger 100 and MultiRanger 200, and is
designed for a variety of applications:
•
water and wastewater
•
storage tanks, for measuring liquids, slurries, and solids
•
hoppers, ore bunkers, flotation cells
MultiRanger 100
The MultiRanger 100 is a single or dual-point level, one, three, or six relay measurement
device. It is equipped with digital communications and offers the latest in echo
processing technology and diagnostic features.
MultiRanger 200
The MultiRanger 200 is a single or dual-point, three or six relay device that offers both
level and volume measurement. It has Open Channel Monitoring capabilities, a larger
number of advanced pump control algorithms, and is equipped with digital
communications. It offers the latest in echo processing technology and diagnostic
features.
The Manual
The manual provides instruction for both MultiRanger 100 and MultiRanger 200 models.
For your convenience, the manual uses MultiRanger 100 features as its standard content.
Additional MultiRanger 200 features are clearly marked.
The manual is designed to help you get the most out of your MultiRanger, and it provides
information on the following:
•
How to program the unit
•
Example applications
•
Principles of operation
•
Parameter values
•
Parameter uses
1.
Modbus is a registered trademark of Schneider Electric.
If you have any questions, comments, or suggestions about the manual contents, please
email us at techpubs.smpi@siemens.com.
For the complete library of Siemens Milltronics manuals, go to
www.siemens.com/processautomation.
7ML19981FB05
MultiRanger 100/200 – INSTRUCTION MANUAL
•
Outline diagrams
•
Wiring diagrams
•
Installation requirements
1
•
Modbus®
register mapping
•
Modem configuration
Page 1