Example Exponents
PMD Type
Suppressed Rectangular Weir
Cipolletti Weir
Venturi Flume
Parshall Flume
Leopold Lagco
V-Notch Weir
P602 Primary Measuring Device Dimensions [MR 200]
The dimensions of the Primary Measuring Device (PMD).
Primary Index
Secondary Index
Index Values for
Supported PMDs
Altered By
Use this parameter if the Primary Measuring Device is directly supported (P600=2,3,6,7).
The dimensions required for each PMD vary.
For more information on PMD, see page 72.
7ML19981FB05
MultiRanger 100/200 – INSTRUCTION MANUAL
Exponent (sample only)
1.50
1.50
1.50
1.22 to 1.607
1.547
2.50
Single Point Model
Global
Dimension
ISO 1438/1
1
Notch Angle
2
Discharge Coefficient
ISO 4359
1
Approach width
2
Throat width
3
Hump Height
4
Throat Length
5
Velocity coefficient
6
Discharge coefficient
Palmer Bowlus
1
Flume width
H Flume
1
Flume height
•
P600 Primary Measuring Device
Dual Point Model
Transducer and Dimension
Page 167