Primary and Secondary Indexes
Primary Index: relates to direct input or output and can refer to relays, communications
ports, and other parameters. In parameters that allow secondary indexes, the primary
index is often referred to as a point.
Secondary Index: relates to previously indexed parameters where the parameter
requires a second index, permitting multiple values on an indexed input or output.
Primary Index
Example Setting: P111[3] = 52
1
•
P111 sets the Relay Control Function
•
P111(3) = 52 sets Relay #3 to a value of 52.
Secondary Index
Parameters with a secondary index permit multiple values for a primary index (point). For
example, a volume calculation based on vessel characterization breakpoints requires a
distinct set of breakpoints for each measured point.
Thus the primary index refers to the measurement point, and each secondary index refers
to a characterization breakpoint value.
Accessing a Secondary Index
1.
Press MODE
icon appears under the index field.
2.
Enter the secondary index, and then enter the values to set the secondary index.
Page 36
MultiRanger 100/200 – INSTRUCTION MANUAL
P111
2
3
52
and then press DISPLAY
4
5
to activate secondary index. The
6
7ML19981FB05