Ring down times that extend past the near blanking area can be interpreted by the
MultiRanger as the material level and are characterized by a steady high level being
reported.
Unit Repair and Excluded Liability
All changes and repairs must be done by qualified personnel and applicable safety
regulations must be followed. Please note the following:
•
The user is responsible for all changes and repairs made to the device.
•
All new components must be provided by Siemens Milltronics Process
Instruments Inc.
•
Restrict repair to faulty components only
•
Do not re-use faulty components.
Page 238
MultiRanger 100/200 – INSTRUCTION MANUAL
7ML19981FB05