Table of Contents
Advertisement
SITRANS F M
6.2.6
Installation in IP 66 wall
mounting enclosure
6. Installation of transmitter
1. Mount the IP 66 enclosure on the wall with four screws.
2. Mount the SENSORPROM
The SENSORPROM
®
unit is supplied with the sensor in the terminal box. The connection
board for IP 66 wall mounting boxes must be used.
3. Connect the cables to the terminals, see "Electrical connection", chapter 7.
4. Insert the transmitter and close the cover.
®
memory unit on the connection board as shown.
53
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
