Palmer Bowlus Flume - Siemens MAG 1100 Operating Instructions Manual

Palmer Bowlus Flume

D/2, point of
measurement
Parameter
P600
P602
P603
P604
P605
P606
Application Information
• Sized by pipe diameter D
• Flume relief is trapezoidal
• Designed to install directly into pipelines and manholes
• Head is referenced to bottom of the throat, not bottom of the pipe
• For rated flows under free flow conditions, the head is measured at a distance of
D/2 upstream from the beginning of the converging section
Page 76 MultiRanger 100/200 – INSTRUCTION MANUAL
Plan View
Flow
Side View
Index
G 2–Palmer Bowlus Flume
1 Flume width (D)
G Maximum Head (preset = P007)
G Maximum Flow
G Zero Head
G Time Units
Front View
Transducer
P603
Value
P006
P007
P605
7ML19981FB05