Preset Password; Reset Password - Siemens SIPART PS100 Operating Instructions Manual

1. Start the SITRANS mobile IQ app.
The smartphone or tablet automatically searches for Bluetooth field devices in the vicinity.
The field devices found are listed. Select the desired field device in the device list.
2. Enter the delivery password "Sitrans AW050!". The delivery password must be changed
during the first connection setup.
3. Assign a new password.
– Before assigning a password, make sure that no 2 field devices with the same serial
– Assign a new password that is not the same as the default password. The new password
– If the mobile end device, e.g. smartphone or tablet, has access protection, the
When the connection is established, the LED on the SITRANS AW050 Bluetooth adapter blinks
once a second.
B.3

Preset password

The delivery password set in the factory must be changed during the first connection setup.
The preset password is "Sitrans AW050!".
Please note that this password
• is used in the procedure used to connect the field device to SITRANS Mobile IQ
• The default value is the one used when resetting the password.
B.4

Reset Password

Procedure
1. Select "Reset password".
2. Once you have selected "Reset password", disconnect the ribbon cable between the
SITRANS AW050 and the device within 60 seconds.
3. Wait for 30 seconds.
4. Insert the ribbon cable again.
The password is reset to the default password.
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF
number are displayed in the selection list.
must consist of at least 12 (arbitrary) characters.
SITRANS mobile IQ automatically saves the passwords of the connected field devices. You
can delete individual, stored device passwords in the app.
Bluetooth
B.4 Reset Password
75