Table of Contents
Advertisement
Installing SmartLinx Card
SmartLinx cards are generally pre-installed. If unit does not have a SmartLinx card, follow
these steps to install one.
1.
Align card with the two mounting posts and then press-fit with the female
connector.
2.
Use the screws supplied with the card to attach it to the mounting posts.
3.
Wire in the SmartLinx card according to SmartLinx Manual.
Page 14
MultiRanger 100/200– INSTRUCTION MANUAL
7ML19981FB05
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
