Lcr Class Of Service Table; Route List Table - Vodavi STARPLUS Triad-S Manual

Programming LCR Tables
When all of the tables and entries are checked the system then processes the call on the
outside CO line.
LCR COS Priority
A station should be assigned a class of service for LCR. The LCR COS can be between 0 and 6,
with 0 being unrestricted and 6 being the most restrictive. Within the time period route List
table, line groups are given an LCR COS Priority assignment between 0 and 6.
A station using LCR is able to use only those CO (outside) line groups with a priority
assignment of equal or higher value than the station's LCR Class of Service (e.g., a station with
LCOS 3 can use line groups with a priority between 3 and 6).
Allow Access
To Route
S
T
A
L
C
R
C
O
S
N = Cannot Use Line Group
Y = Has Access to Line Group
Programming Steps
1. Press the ROUTE LIST TABLE flexible button (FLASH 75, Button #4). The following
message displays:
2. To create an entry, dial [RR] + [T ] + [GG] + [DD] + [L], then press HOLD to save the entry.
A confirmation tone sounds and the display updates.
Make sure you made entries into all Time Period Route Lists referenced in the
weekly schedule table.
Table B-1: LCR Class of Service Table
0 1
0 Y Y
1 N Y
2 N N
3 N N
4 N N
5 N N
6 N N
R OU TE LI S T TAB L E
RR T G G DD
RR = Route List Table Number 00–15
T = Time Period Route List 1–4
GG = CO Line Group 00–23
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
LCR CO Line Group Priority
2 3 4
Y Y Y
Y Y Y
Y Y Y
N Y Y
N N Y
N N N
N N N
L
Chapter - Least Cost Routing
5 6
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
N Y
B-9