80
LCR Operation
To place an outside call when LCR is enabled in the system:
1.
Dial [9] on the dial pad,
-or-
Press the preprogrammed LCR button.
2.
Dial the desired telephone number.
3.
Wait for an answer. Lift the handset or use the speakerphone to
converse.
If all available lines are busy, remain off-hook for four seconds to
automatically be queued onto LCR for an available line, then hang
up.
LCD Queue Call Back
To answer an LCR Queue Call Back:
1.
When your telephone is signaled, answer the call.
2.
The desired telephone number will automatically be redialed.
CO Line Queue Cancel
To cancel a Call Back Request:
1.
Dial the CO Line Queue Cancel code [626] on the dial pad.
2.
Replace the handset, or press the ON/OFF button (SPEAKER button
on IP Phone).
XTS-IP / XTSc-IP Station User Guide
Only one LCR Queue Call Back request may be initiated
by a station. When a second request is made, the first
request is cancelled.
If the 911 feature is enabled, the LCR access code is 800
instead of 9.
LCR Operation
March 2007