Co Port Parameters; Initialize Co Port Assignments / Flexible Numbering Assignments - Vodavi STARPLUS Triad-S Manual

2-86
Chapter 2 - Features and Operation
5. Enter a valid number (0-3) on the dial pad which corresponds to the desired CO type:
[0] = Out-of-Service (OOS)
[1] = Incoming Only
[2] = Outgoing Only
[3] = Both Incoming and Outgoing
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... All CO Lines default to both incoming and outgoing type.
Conditions
»
For PRI cards, the 24th channel must be marked as Out-of-Service (OOS). This is true on all
PRI cards, not just for networking.

CO Port Parameters

Initialize CO Port Assignments / Flexible Numbering Assignments

Description
CO Port Parameters and Flexible Numbering Assignments can be initialized to default values.
Refer to
Assignments.
Programming Steps
1. Press the CO PORTS/COD flexible button (FLASH 80, Button #4).
2. The following message displays:
3. Press the HOLD button. A confirmation tone sounds.
"FLASH 52" on page C-17, within
IN IT IA LI Z E CO
PR E S S H OL D
Table C-1, for default values of Flexible Numbering
P OR TS /COD
CO Port Parameters