Vodavi STARPLUS Triad-S Manual page 165

Flexible Numbering
3. Press HOLD. The fixed and flexible number, as well as a description of the code, displays
on the LCD.
To change a Flexible Code:
1. Select the desired code.
2. Press Button 1. The red LED illuminates.
3. Delete the flexible number by pressing button 2 and then pressing HOLD. The flexible
number field will be blank.
4. Enter the new code (2-4 digits).
5. Press HOLD.
To erase a Flexible Code:
1. Select the desired code.
2. Press Button 1 (must be lit).
3. Press Button 2.
4. Press HOLD.
Conditions
»
Feature access codes cannot conflict with station numbering.
»
CO line numbers are fixed and cannot be changed.
»
If no VM ID digits are programmed in the station field, the flexible number assigned to
the station will be sent to the VM unit.
»
Flash 06, Button #15 is the programming area to automatically assign the VMID digits to
be the same as the flexible station numbering.
»
The SMDR will output 4-digit numbers in the station field. If less than 4 digits is selected
in the numbering plan, leading spaces will be added in place of the numbers. The 3-4
digit SMDR programming area will be removed from programming.
»
The Discovery ACD event trace source and destination fields will be 4 digits. Station
numbers less than 4 digits will be prefixed with leading zeros.
»
The programming will print out as part of the CO-STA port programming area. The
flexible numbering can be initialized in the CO-STA initialization area.
You can scroll through the codes by using the PREVIOUS button (23) or the
NEXT button (22).
Station/Pilot numbers can only contain 0-9.
Feature codes can contain 0-9, *, #.
Chapter 2 - Features and Operation
2-139