Slt Hook Flash Bounce Timer - Vodavi STARPLUS Triad-S Manual

Single Line Telephone
Programming Steps
1. Press the SLT HOOK FLASH TIMER flexible button (FLASH 01, Button #14). The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 0.5-2.0 seconds in 1/10 second
increments.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... SLT Hook Flash Timer is set at 10 (one second).

SLT Hook Flash Bounce Timer

Description
The SLT Hook Flash Bounce Timer determines the time needed to determine a valid on-hook
or off-hook condition for single line telephones. On-Hook or Off-Hook signals that are shorter
in duration than this timer are ignored by the system. Refer to
The SLT Hook Flash Bounce Timer setting is variable from 0-1 seconds in 10 ms increments.
This is a 3-digit entry where 010 equals 0.1 seconds.
Programming Steps
1. Press the SLT HOOK FLASH BOUNCE TIMER flexible button (FLASH 01, Button #15). The
following message displays:
2. Enter a valid number on the dial pad that corresponds to 0-1 seconds in 10 ms
increments.
H O O K S W ITCH TI M E
1 0
Figure 2-14: Hook Switch Activity
H O O K S W T B OU N CE
0 3 0
Chapter 2 - Features and Operation
0 5-20
Figure 2-14
000 -1 00
2-209
.