Vodavi STARPLUS Triad-S Manual page 96

2-70
Chapter 2 - Features and Operation
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the RING ASSIGNMENT flexible button (FLASH 40, Page A, Button #10). The
display shows the following information:
5. Enter a valid Destination (DDD) or (DDDD) and Ring type (R) followed by the HOLD
button. A confirmation tone sounds and the display updates.
CO LI N E AT TR I B U TE S
S E LE C T A CO L IN E R A NG E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X X X PAG E A
E N T E R B U T TO N N U M B E R
XXX-XXX = CO Line Range
RI NG AS SI G NM E NT S
E NTE R D DD R
The actual LCD displays a 3-digit destination field (DDD), but both a 3- or 4-digit
entry is possible.
CO Line - Incoming Ringing Assignment